Amorphous Alloy Dry type Transformers
Model : SC(B)H15 Type 6~10kV
| Product overview |
 |
SCBH15 series amorphous alloy dry-type transformer manufactured from TAILI,is the most advanced energy-saving dry-type transformer in modern times. The high-voltage coil is wound with H-class high-strength enamelled wire, the low-voltage coil is wound with copper foil, vacuum pressure casting, and the iron core is rolled from amorphous alloy strip.The no-load loss is 75% lower than that of s11, and the load loss is 15% lower. Amorphous alloy uses an advanced ultra quench technology to spray liquid melts such as iron, cobalt, boron and silicon onto a chassis with extremely high speed and rapidly cool them to form a 0.02mm-0.04mm thin strip. It has excellent properties like soft magnetic, corrosion resistance, wear resistance and high resistivity.
It has the characteristics of maintenance free, moisture and heat resistance, fire prevention, explosion-proof, small partial discharge and strong heat dissipation capacity. All places where ordinary dry-type transformers are used now (including airports, stations, urban subways, high-rise buildings and power plants, etc.) can be replaced by amorphous alloy dry-type transformers, which can be placed in the load center to meet the needs of the development of modern large cities. |
| Features |
1. The coil is wound with copper wire or foil and reinforced with glass fiber. The epoxy resin is vacuum dried, degassed and dehumidified without filler. It has high mechanical strength, short circuit resistance and impact resistance.
|
2. The head and end of the high-voltage winding and the middle tapping adopt the copper insert embedded structure, which has good rigidity, is easy to adjust gears, and is beautiful and tidy.
|
3. The iron core is made of oriented cold-rolled silicon steel sheets, with 45 degree fully inclined multi-step joints. The surface is covered with resin insulation coating, which is resistant to moisture, rust and noise.
|
4. The iron core, clamp and coil are clamped by elastic parts, so that the coil is in a stable compression state to reduce noise
|
5. The transformer is designed by self cooling. Longitudinal ventilation duct is reserved inside the barrel wall of the integrally cast high and low voltage coil, which can be equipped with forced air cooling device (cooling fan). With forced air cooling device , the output capacity can be increased by 20%.
|
Technical sheet
Rated
capacity
(kVA) |
Voltage combination |
Connected
group
label |
No-load
loss (W) |
Load loss (W) |
No-load
current (%) |
Impedance
voltage (%) |
High
voltage
(kV) |
(%) tap
range |
Low
Voltage
(kV) |
| 130°C(B) |
155°C(F) |
180°C(H) |
| 100°C |
120°C |
145°C |
| 50 |
20
22
24 |
±2X2.5
±5 |
0.4 |
Dyn11
YynO |
340 |
1160 |
1230 |
1310 |
2.0 |
6.0 |
| 100 |
540 |
1870 |
1990 |
2130 |
1.8 |
| 160 |
670 |
2330 |
2470 |
2640 |
1.5 |
| 200 |
730 |
2770 |
2940 |
3140 |
1.5 |
| 250 |
840 |
3220 |
3420 |
3660 |
1.3 |
| 315 |
970 |
3850 |
4080 |
4360 |
1.3 |
| 400 |
1150 |
4650 |
4840 |
5180 |
1.1 |
| 500 |
1350 |
5460 |
5790 |
6190 |
1.1 |
| 630 |
1530 |
6450 |
6840 |
7320 |
1.0 |
| 800 |
1750 |
7790 |
8260 |
8840 |
1.0 |
| 1000 |
2070 |
9220 |
9780 |
10400 |
0.85 |
| 1250 |
2380 |
10800 |
11500 |
12300 |
0.85 |
| 1600 |
2790 |
13000 |
13800 |
14800 |
0.85 |
| 2000 |
3240 |
15400 |
16300 |
17500 |
0.7 |
| 2500 |
3870 |
18200 |
19300 |
20700 |
0.7 |
| 2000 |
3240 |
16800 |
17800 |
19100 |
0.7 |
8.0 |
| 2500 |
3870 |
20000 |
21200 |
22700 |
0.7 |
More product
More product
Delivery and Projects
Detail photo
Ex-factory quality assurance
1.Routine test:Measurement of winding resistance,Measurement of voltage ratio,Check of vector group,Mesurement of impendance voltage and load loss,Measurement of no load loss and current,Separate-source voltage withstand test,Induced overvoltage withstand test,Dimension checking
2.Type tests:Lighting impulase test,Temperature rise test
3.Special tests:The company is accelerating the cultivation and development of productivity, and creating high-level intelligent production.
Our advantages:
DESIGN ALIBILTY:Our design team can combine the needs of customers from East Europe, Africa, South America, the Middle East, Southeast Asia and other countries to customize transformers for different local market demand. As a Chinese manufacture with more than 25 years' experience We can produce transformer with European quality at a very competitive price, and perfect replacement of imported products from Europe, so that users can use high-quality power products with the lowest cost to get more advantage in their market.
OUR SERVICE: With 15 years of experience in electrical line, we are committed to providing comprehensive technical supports , design and customized solutions for our partners .And provide timely service for each step within 24 hours from design ,production, logistics, equipment installation ,to ensure clients with an efficiently and smooth operation of the projects! Partners recognition is the motivation and encouragement for us , we attach importance and persue to give one-stop service !
Certifications
Certifications
Company Profile
Know more about our company
Define-TAILI
Total Solution is how we define "TAILI". From design & customization, engineering, manufacturing installation, and after sale service. TAILI provides a Total Solution to our customers helping and supporting to give them a competitive advantage in their market.
TAILI founded in 1988,is one of the largest and most respected manufactures of MV power distribution products in WENZHOU of China, the "Electric Industry Center" of China.We have factories for manufacturing, research &development, and distribution of products: Transformers, Indoor&outdoor switches, Switchgears, Power substations, and electric components for transformer and switchgears.
Our mission at TAILI is to provide the highest quality products at the best possible price. And by doing so, to provide and unmatched customer experience and actively to establish long-term cooperative relationship with our new and old customers.
ATTENTION
1.The payment term: We accept TT, with 30% deposit and 70% balance against copy of BL.
2.The delivery time: Usually it will take about 15 - 20 days.
3.The standard of package: Usually use a strong plywood case for protection.
4.The material of transformer: We have two types. One is with copper and the other is with aluminum. It depends on your requirement. In fact, those two are different when they are working well. The only difference is in long - term use. Copper is better and also has a higher price.
5.The logo: If you have a large quantity, it is absolutely no problem to do OEM.
6.Our market: Our products are popular in Indonesia, the Philippines, Russia, the USA, the Middle East and so on. Some of the customers there are our regular customers and some are being developed. We hope you can join us and benefit mutually from our cooperation.
7.Warranty: within 12 months since the BL date.
FAQ
Q1: Are you a manufacturer or trading company?
A1: Yes, we are a manufacturer dedicated to designing customized products according to different country standards and the production of a wide range of high-quality transformers, switchgears, and power substations. Meanwhile, we can also provide relevant accessories and components with guaranteed quality from our branch factories. We improve the design to make our products more competitive in the market while maintaining better quality to ensure long-term performance.
Q2: How does your factory handle quality control and after-sales support?
A2: All the products will be 100% checked and tested before delivery. We also have an inspection team to make videos with customers online or send them via email. All our products comply with strict tests, ensuring easy maintenance. We also offer online after-sale service in case of any further problems.
Q3: When can I get the price?
A3: Usually we quote within 1 hour after we receive your inquiry. For customized products that need special design, we will quote within 12 hours with detailed specifications for confirmation.
Q4: Can you manage the delivery directly to our country under the DIP term?
A4: Yes, we have our own logistics company that helps to find a better solution for delivery, making the delivery time more punctual and at a lower cost.
Q5: Can I get a product guarantee after delivery?
A5: Yes, every product has a 2-3 year quality warranty under the condition that customers use the products correctly.
Q6. Do you have any certificates?
A6: Yes. Each of our products has CE, 3C and CQC certificates. If you need any other certificates, we can help you apply for them.
Q7: How can I pay you?
A7: Payment by T/T and L/C is acceptable.
Audited Supplier 
){kind=link}